Nextodi NVS2525 Manual de usuario Pagina 9

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 8
11
NVSPRO+ INTERFACE
NVSPRO+ INTERFACE
12
1. Turning NVSPRO+ on/off
8. NVSPRO+ Interface
Reference
● The NVSPRO+ can be reset via the recessed RESET key (see chapter 5 and
chapter 22). This will also turn the power off.
145.0 GB
XCopy Ready
Menu Off
102.3 GB
Power Off
2. Key operation
The NVSPRO+ is operated by a single control key which can be used in five
different ways. The display shows you the “S” (Short) or “L” (Long) symbol as
a means to invoke the desired function.
Symbols
Operation
S
L
Press once and release immediately.
Press and hold the key for more than two seconds.
Push the key in the appropriate direction.
Up/down/left/right movements are supported.
Pushing and Holding the key in the up or down
direction, results in repeated executions of
the operation.
▲▼◀▶
3. The LED indicator
NEXTO VIDEO STORAGE pro+
Ver 1.0
Control
Button
Off
LCD
Press the power key on the right side of device
for more than 2sec in order to switch NVSPRO+
on. The power up logo and firmware version is
shown on the LCD.
When you see the logo on the LCD screen,
release the button. Otherwise, the NVSPRO+
will automatically power down.
After checking the system, the NVSPRO+ goes
into [XCopy ready] mode.
You can copy a memory card in this mode.
The NVSPRO+ turns off automatically after
about 50 seconds if you do not use it.
When the (L) Off control option appears on
the LCD, the NVSPRO+ can be powered off by
pressing down on the control key or power key
for more than 2 seconds.
If the control key is not working: If the control key is malfunctioning,
the menu sub-functions cannot be used. However, functions such as copy and
verify can s ed through the power key. The user could thus rely on the power
key—instead of the control key—to select the desired function from the menu.
Red indicates battery is being charged.
Green indicates “power on”.
Blinking red indicates that a data transfer is
occurring.
Vista de pagina 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comentarios a estos manuales

Sin comentarios